| home | company | products | quality assurance | service | spares | contact |
   

 

FLOATING BALL CONSTRUCTION

These are designed to support the ball on two seats located on up-stream and down-stream sides. Floating ball valves are generally used in small bore piping or low pressure clean service.
Two or three pieces body, blow-out proof stem, antistatic device, fire-safe designed and certified.
Execution : full or reduced bore
Materials : carbon steel, stainless steel, special alloys

2- 3 PCS END ENTRY TYPE

size :  from 1/4" to 2"
ends : threaded and butt or socket welding
class : 800 - 1500 - 3000 - 6000 lbs

SPLIT BODY FLANGED

size :  from 1/2" to 8"
ends : flanged and butt welding
class : 150 - 300 - 600 lbs - DIN/UNI/PN 16-64

WAFER TYPE ( FLANGELESS )

 

size :  from 1/2" to 8"
ends : thick body to be inserted between flanges
class : 150 - 300 lbs - DIN/UNI PN 16-40

OPTIONS

all above valves are available with following options ( at extra price) :
- extended stem for insulating
- extended stem for cryogenic service ( with double packing, lantern ring, and grease fitting nipple )
- operated by worm gear box
-operated by pneumatic, electric or hydraulic actuators ( see motorized valves)

Copyright 2006 Control Fluid srl - info@controlfluid.com