Floating Ball Valves
Our floating ball valves are low torque, quarter turn rotary action with low resistance to flow and are suitable for many on-off utility and process services.
The valves have a straight through configuration typical of the sliding method of closure.
Most of our floating ball valves are fitted with resilient soft seats, usually PTFE and nylon, which can provide bubble tight sealing. This kind of sealing limits the maximum working temperature and make the valve unsuitable for abrasive service because lips of soft seats are easily damaged by hard particles.
½" - 8"
150# - 1500#
ASME VIII or B 16.34
Carbon Steel, Stainless Steel, Duplex, Super Duplex Incoloy, Bronze Titanium Exotic
Forged or Cast
Soft or Metal
O-Rings or Lip-Seals
Graphite, Devlon, TFM, PTFE, PEEK, POM, PCTFE
API 598 - API 6D
Wrench, Gear, Actuated
All materials are in conformity with NACE MR 01-75
Stabilimenti di produzione di valvole a sfera
Via per Gallarate, 50
21010 Besnate (VA)
Stabilimento di produzione di Gate, Globe
and Check Valves
Via A. Mauri
20900 Monza (MB)
CONTROLFLUID - KOREA