
Floating Ball Valves
Our floating ball valves are low torque, quarter turn rotary action with low resistance to flow and are suitable for many on-off utility and process services.
The valves have a straight through configuration typical of the sliding method of closure.
Most of our floating ball valves are fitted with resilient soft seats, usually PTFE and nylon, which can provide bubble tight sealing. This kind of sealing limits the maximum working temperature and make the valve unsuitable for abrasive service because lips of soft seats are easily damaged by hard particles.
Valve Specs
Valve Design
Side Entry
Construction
Bolted Body
Trim Design
Floating ball
Size
½" - 8"
Pressure Range
150# - 1500#
Design
ASME VIII or B 16.34
Materials
Carbon Steel, Stainless Steel, Duplex, Super Duplex Incoloy, Bronze Titanium Exotic
Material Status
Forged or Cast
Seats
Soft or Metal
Seals
O-Rings or Lip-Seals
Seat materials
Graphite, Devlon, TFM, PTFE, PEEK, POM, PCTFE
Testing
API 598 - API 6D
Operator
Wrench, Gear, Actuated
All materials are in conformity with NACE MR 01-75
Request a quote
Contact Us
CONTROLFLUID s.r.l.
Via Braia, 55
16019 Ronco Scrivia (GE)
ITALIA (IT)
Tel. +39 010 9642630
Fax +39 010 9642641
Sede principale
Assemblaggio valvole motorizzate, elettriche e pneumatiche, ispezione finale e collaudi NDT
CONTROLFLUID s.r.l.
Stabilimenti di produzione di valvole a sfera
Via per Gallarate, 50
21010 Besnate (VA)
ITALIA (IT)
CONTROLFLUID s.r.l.
Stabilimento di produzione di Gate, Globe
and Check Valves
Via A. Mauri
20900 Monza (MB)
ITALIA (IT)
CONTROLFLUID - KOREA
Produzione estera
269, Hawmok-Dong
Gimhae-City Gyeongnam
KOREA (KR)

